Dell Emulex Family of Adapters - Manual (Page 484)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
4. Offline Adapter Management Utility Command Line Interface
Running the Offline Adapter Management Utility from the Command Prompt
484
4. Offline Adapter Management Utility
Command Line Interface
The Offline Adapter Management Utility allows you to configure Emulex adapters
before you install or boot a server operating system.
The Offline Adapter Management Utility includes:

winlpcfg

linlpcfg
You can use the Offline Adapter Management Utility to do the following:

View information on an Emulex adapter

Reset the adapter

Download firmware and boot code files

Select a boot device

Read and update WWNs

Enable boot code

Update configuration regions

Set the adapter to use soft jumpers

Run diagnostic tests

Read and process script files
Running the Offline Adapter Management Utility
from the Command Prompt
Note: You must start the WinPE and Linux Offline Adapter Management Utility at the
command prompt.
1. Boot the system with a supported operating system.
2. Start the Offline Adapter Management Utility with a valid command or a valid
script file name.

To start an Offline Adapter Management Utility from the command line, move
to the directory where the executable file resides and type
oslpcfg <valid command> (replace os with ./lin or win as appropriate)

For example, starting the WinPE Offline Adapter Management Utility with
a reset command:
winlpcfg reset n=2

For example, starting the Linux Offline Adapter Management Utility with a
reset command:
./linlpcfg reset n=2

To start an Offline Adapter Management Utility with a script file name, from
the directory where the oslpcfg.exe file resides, type
oslpcfg @<script file name>