Dell Emulex Family of Adapters - Manual (Page 1569)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
4. Configuring Boot from SAN for the FCoE Protocol
Solaris
1569
Booting Solaris 10 from the Network on SPARC Machines
To boot from the network:
1. Set up the install server and the boot server (if required). See the topic for
Network-Based Installations in the Solaris 10 10/09 Installation Guide.
2. Obtain the MAC address of the OCE port used for the net boot:
a. Get the device path of the port from the show-devs command:
{0} ok show-devs
/pci@0/pci@0/pci@8/pci@0/pci@1/emlx@0,3
/pci@0/pci@0/pci@8/pci@0/pci@1/emlx@0,2
/pci@0/pci@0/pci@8/pci@0/pci@1/oce@0,1
/pci@0/pci@0/pci@8/pci@0/pci@1/oce@0
/pci@0/pci@0/pci@8/pci@0/pci@1/emlx@0,3/fp@0,0
b. Select the OCE device to boot:
{0} ok " /pci@0/pci@0/pci@8/pci@0/pci@1/oce@0,1" select-dev
c. Get the MAC address of the selected device from its properties:
{0} ok .properties
status okay
assigned-addresses 82020014 00000000 00100000 00000000 00004000
82020018 00000000 00120000 00000000 00020000
82020020 00000000 00140000 00000000 00020000
82020030 00000000 00180000 00000000 00080000
model OCe10102
fcode-version 4.0.0.0
reg 00020000 00000000 00000000 00000000 00000000
02020014 00000000 00000000 00000000 00004000
03020018 00000000 00000000 00000000 00020000
03020020 00000000 00000000 00000000 00020000
02020030 00000000 00000000 00000000 00040000
compatible pciex19a2,700.10df.e602.2
pciex19a2,700.10df.e602
pciex19a2,700.2
pciex19a2,700
pciexclass,020000
pciexclass,0200
max-frame-size 000005ee
address-bits 00000030
supported-network-types ethernet,10000,null,full
copyright Copyright (c) 2009-2011 Emulex. All rights
reserved.
name oce
device_type network
manufacturer Emulex
fcode-rom-offset 00016e00
interrupts 00000001
cache-line-size 00000010
class-code 00020000