Dell Emulex Family of Adapters - Manual (Page 1387)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1387
showtarget
Syntax
elxvcpcmd.exe v=<vcenter server> u=<vc_username> p=<vc_pwd> <h=ESXhostIP>
showtarget <MAC>
Description
This command shows the iSCSI target details of the adapter to which the specified
iSCSI port belongs.
Parameters
sriovenable
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> sriovenable <MAC> <0 | 1>
Description
This command enables or disables SR-IOV support for an adapter's physical port.
Parameters
Note: SR-IOV is not supported with UMC channel management.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC port.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
MAC
The MAC Address of any NIC function on the physical
adapter port.
SR-IOV Enable state
0 = disable SR-IOV
1 = enable SR-IOV