Dell Emulex Family of Adapters - Manual (Page 617)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
3. Configuration
NIC Driver Configuration
617
Displaying All Parameters
To display the current value of all parameters, use either “-p” or “-q” command line
options. This shows the registry value or driver value of the parameter, or both when
using “-pq” together.
For example:
occfg.exe -a "SLOT 5 Port 1" -pq
OneConnect Network Config (10.2.164.0)
Copyright 2011 Emulex
Emulex OneConnect OCe14102-UX-D 2-port PCIe 10GbE CNA (SLOT 5 Port 1)
Display all properties.
[Registry] Class of Service (802.1p) = 1 (Auto Priority Pause)
[Driver] Class of Service (802.1p) = 1 (Auto Priority Pause)
[Registry] Encapsulated Task Offload = 1 (Enabled)
[Driver] Encapsulated Task Offload = 1 (Enabled)
[Registry] Enhanced Transmission Selection = 0 (Disabled)
[Driver] Enhanced Transmission Selection = 0 (Disabled)
[Registry] Flow Control = 3 (Rx & Tx Enabled)
[Driver] Flow Control = 0 (Disabled)
[Registry] IPv4 Checksum Offload = 3 (Rx & Tx Enabled)
[Driver] IPv4 Checksum Offload = 3 (Rx & Tx Enabled)
[Registry] Interrupt Moderation = 4 (Adaptive (default))
[Driver] Interrupt Moderation = 4 (Adaptive (default))
[Registry] Large Send Offload V1 (IPv4) = 1 (Enabled)
[Driver] Large Send Offload V1 (IPv4) = 1 (Enabled)
[Registry] Large Send Offload V2 (IPv4) = 1 (Enabled)
[Driver] Large Send Offload V2 (IPv4) = 1 (Enabled)
[Registry] Large Send Offload V2 (IPv6) = 1 (Enabled)
[Driver] Large Send Offload V2 (IPv6) = 1 (Enabled)
[Registry] Maximum Number of RSS Processors = <not set>
[Driver] Maximum Number of RSS Processors = <not set>
[Registry] Maximum Number of RSS Queues = 6
[Driver] Maximum Number of RSS Queues = 6
[Registry] Maximum RSS Processor Number = <not set>