Dell Emulex Family of Adapters - Manual (Page 953)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
953
2581: Not enough WQs (<sli4_hba.max_cfg_param.max_wq>) from the pci function
for supporting FCP WQs (<cfg_fcp_wq_count>)
The driver was not configured with the minimum number of fast-path work queues.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2582: Not enough WQs (<max_wq>) from the pci function for supporting the
requested FCP WQs (<cfg_wq_count>), the actual FCP WQs can be supported:
<wq_count>
The driver was not configured with enough fast-path work queues.
Data: None
Severity: Warning
Log:
LOG_INIT
Action: None required.
2593: The FCP EQ count(<cfg_fcp_eq_count>) cannot be greater than the FCP WQ
count(<cfg_fcp_wq_count>), limiting the FCP EQ count to <cfg_fcp_wq_count>
The fast-path event queue cannot be greater than the fast-path work queue count.
Data: None
Severity: Warning
Log:
LOG_INIT
Action: None required.
2597: Mailbox command <vpi> (<mbxCommand>) cannot issue
Synchronou(2) sli_flag (3) flag
Data: None
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action: None required.
2598: Adapter Link is disabled.
The adapter link has been disabled.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2599: Adapter failed to issue DOWN_LINK mbox command rc <rc>
The driver was unable to issue the DOWN_LINK mailbox command.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2600: lpfc_sli_read_serdes_param failed to allocate mailbox memory
Failed to allocate mailbox memory.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)