Dell Emulex Family of Adapters - Manual (Page 186)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
NIC
186
Configuring DCB Parameters for NIC Only Adapter Ports
The DCB tab displays parameters for NIC-only adapter ports.
To view the DCB parameters for NIC-only adapter ports:
1. From the discovery-tree, select the NIC adapter port whose DCB properties you
want to view.
2. Select the DCB tab.
Figure 8-48 DCB Tab for NIC Adapter Ports (NIC Adapter Selected)
DCB Tab Field Definitions

DCBX State – The current DCBX state (enabled or disabled).

LLDP Transmit State – DCBX uses LLDP to exchange parameters between two
link peers. For the DCBX protocol to operate correctly, both LLDP Rx and Tx
must be enabled. If either Rx or Tx is disabled, DCBX is disabled.

LLDP Receive States – DCBX uses LLDP to exchange parameters between two
link peers. For the DCBX protocol to operate correctly, both LLDP Rx and Tx
must be enabled. If either Rx or Tx is disabled, DCBX is disabled.