Dell Emulex Family of Adapters - Manual (Page 575)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
2. Installation
Removing Emulex Driver Kits and Drivers
575
12. When the device driver finishes installing, click Close.
The driver installation is completed. The driver should start automatically.
Windows Server 2012
1. Select Server Manager>Dashboard>Tools>Computer Management>Device
Manager.
Note: Server Manager is set to open by default when booting Windows Server
2012. If it does not open automatically, you can open it with the Server
Manager icon at the bottom left of the screen.
2. Open the Network Adapters item.
3. Double-click the desired Emulex adapter.
4. Select the Driver tab.
5. Click Update Driver. The Update Driver wizard starts.
6. Click Browse my computer for driver software.
Note: The driver affects only the selected adapter. If there are other adapters in the
system, you must repeat this process for each adapter. All dual-channel
adapter models are displayed in the Device Manager as two adapters,
therefore, you must update each adapter.
7. Click Let me pick from a list of device drivers on my computer.
8. Select the network adapter that matches your hardware and click Have Disk....
9. Direct the Device Wizard to the location of ocnd63.inf. Select the desired
oemsetup.inf file and click Open.
If you have installed the driver installer kit
in the default folder, the path is:
C:\Program Files\Emulex\AutoPilot Installer\Drivers\NDIS\x64\NIC\Win2012
10. Click Next.
11. When the device driver finishes installing, click Close.
The driver installation has completed. The driver should start automatically.
Removing Emulex Driver Kits and Drivers
Uninstalling Emulex Driver Kits
Note: When you uninstall the Emulex driver kit, AutoPilot Installer is automatically
uninstalled.
Windows Server 2008
To uninstall a driver kit on a Windows Server 2008 system:
1. Open the Programs and Features control panel.