Fcoe commands, Getfcfinfo, Getfipparams – Dell Emulex Family of Adapters User Manual
Page 370
OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
FCoE Commands
370
Syntax
SetRetentionCount <WWPN|MAC> <Value>
Parameters
Example
hbacmd h=10.192.193.154 m=cim u=root p=Swamiji001 n=root/emulex
SetRetentionCount 00-00-c9-93-2f-9f 6
FCoE Commands
Note: These commands are supported only on OneConnect and LPe16202 FCoE ports.
GetFCFInfo
This command shows the FCF information of the adapter in FCoE mode.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetFCFInfo <WWPN>
Parameters
Example
hbacmd GetFCFInfo 10:00:00:00:c9:3c:f7:88
GetFIPParams
This command gets the FIP parameters of the adapter in FCoE mode.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetFIPParams <WWPN>
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
Value
The number of dump files to retain.
WWPN
The WWPN of an FCoE port.