Applying power, Applying power 3, Figure 2-6 – Dell Emulex Family of Adapters User Manual
Page 1813: Figure 2-6)
Advertising
Emulex Adapter Installation Manual
P010288-01A Rev. A
2. Installation
Applying Power
1813
.
Figure 2-6 Connecting a DAC Cable
2. After the appropriate cable is connected to the adapter, connect the other end of the
cable to a suitable device, such as a Top of Rack (TOR) EE switch.
After the device is connected to the adapter, you are ready to apply power to the
computer.
Applying Power
To apply power:
1. Verify that the adapter is securely installed in the computer.
2. Verify that the correct device is attached.
3. Plug in and turn on the computer.
4. Observe the boot banner for Power On Self Test (POST) results.
Advertising