Getsessioninfo, Getvpd – Dell Emulex Family of Adapters User Manual
Page 1358
OCM for VMware vCenter Version 10.2 User Manual
P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1358
getsessioninfo
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> getsessioninfo <MAC> <Target> <TSIH | <ISID_Qual Target_IP>>
Description
This command lists all session information for a specified session. You must specify the
iSCSI target name <Target> and either the TSIH <TSIH> of the session or the session's
ISID Qualifier <ISID_Qual> and the target's IP address <Target_IP>. These parameters
tell the command to gather the information from the specified target and session. You
can find the TSIH and ISID qualifier by running the ListSessions command.
Parameters
Note: You must specify either the TSIH value or the ISID qualifier. If ISID qualifier is
specified you must also specify the Target’s ID address.
getvpd
Syntax
elxvcpcmd.exe v=<vcenter server> u=<vc_username> p=<vc_pwd> <h=ESXhostIP>
getvpd <WWPN | MAC>
Description
This command shows the VPD details for the specified port on the adapter.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC or iSCSI port.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
MAC
The MAC address of the iSCSI port.
Target
The target’s iSCSI name enclosed in quotes (string length:11-255).
TSIH
The TSIH value of the session (value: 1-65535).
ISID_Qual
The ISID qualifier of the session (value: 0-65535).
Target_IP
The Target's IP address.