Figure 11-2 – Dell Emulex Family of Adapters User Manual
Page 258
Advertising
OneCommand™ Manager Application
P010066-01A Rev. A
11. Configuring Boot from an FC SAN
Boot Device Parameters
258
Figure 11-2 Select Boot Device Window (for x86 or EFIBoot)
10. On the Boot from SAN Configuration dialog box, click Apply to save your changes,
but leave the dialog box open or click OK to apply the changes and close the dialog
box.
Note: Click Close to close the Boot from SAN Configuration dialog box without
saving your changes. A message appears to discard your changes.
11. Reboot the system for your changes to take effect.
Advertising