Figure f-8, Table f-7, Iscsi general parameters page – Dell Emulex Family of Adapters User Manual
Page 1772
Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual
P010097-01B Rev. A
Appendix F. Dell UEFI
Main Configuration Page
1772
iSCSI General Parameters Page
This page allows you to configure the general iSCSI parameters.
Figure F-8 iSCSI General Parameters Page
Table F-7 iSCSI General Parameters Page Menu Options
Menu Option
Description and Available Settings
TCP/IP Parameters via DHCP
Control the source of the initiator IP address: DHCP or static
assignment.
Available settings include:
• Enabled
• Disabled (default)
Note: This option is specific to IPv4.
IP Auto-Configuration
Control the source of the initiator IP address: DHCP or static
assignment.
Available settings include:
• Enabled
• Disabled (default)
Note: This option is specific to IPv6.
iSCSI Parameters via DHCP
Enable the acquisition of iSCSI target parameters from DHCP.
Available settings include:
• Enabled
• Disabled (default)