Dell Emulex Family of Adapters - Manual (Page 1211)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
Viewing and Managing FC/FCoE LUNs
1211
Disabling ExpressLane LUNs
You can disable a specific ExpressLane LUN or disable all ExpressLane LUNS for a
port.
To disable a specific ExpressLane LUN:
1. In the Emulex Device Management tree-view, expand the FC/FCoE adapter port.
2. Expand the FC/FCoE target.
3. Right-click the LUN for which you want to disable ExpressLane.
4. Select Disable ExpressLane LUN from the pull down menu.
To disable all ExpressLane LUNs for a port:
1. In the Emulex Device Management tree-view, expand the FC/FCoE adapter port.
2. Expand the FC/FCoE target.
3. Right-click any LUN with ExpressLane enabled.
4. Select Disable All ExpressLane LUNs on this target from the pull down menu.
Viewing PCI Registers for an FC Port
The PCI Registers tab shows PCI information, including PCI Express details, about the
selected FC port.
Note: The PCI fields may vary with the type of adapter installed.
To view PCI registers for an FC port:
1. Select a host in the vSphere console tree-view and select the Emulex OneCommand
tab.
2. In the Emulex Device Management tree-view, select the FC port for which you want
to view PCI information.
3. Select the PCI Registers tab.
Figure 6-13 FC Port PCI Registers Tab