Dell Emulex Family of Adapters - Manual (Page 1066)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1066
elx_mes0435: Adapter failed to get Option ROM version status <rc>.
DESCRIPTION: The driver could not read the adapter’s option ROM.
DATA: None
ACTION: Reset the adapter. Ensure that the adapter’s firmware is current.
elx_mes0436: Adapter failed to init, timeout, status reg <status>
DESCRIPTION: The adapter failed during power-up diagnostics after it was reset.
DATA: None
ACTION: This error could indicate a hardware or firmware issue. If the issue persists,
report the error to Emulex technical support.
elx_mes0437: Adapter failed to init, chipset, status reg <status>
DESCRIPTION: The adapter failed during power-up diagnostics after it was reset.
DATA: None
ACTION: This error could indicate a hardware or firmware issue. If the issue persists,
report the error to Emulex technical support.
elx_mes0438: Adapter failed to init, chipset, status reg <status>
DESCRIPTION: The adapter failed during power-up diagnostics after it was reset.
DATA: None
ACTION: This error could indicate a hardware or firmware issue. If the issue persists,
report the error to Emulex technical support.
elx_mes0439: Adapter failed to init, mbxCmd <mbxCommand> READ_REV,
mbxStatus <mbxStatus>
DESCRIPTION: Adapter initialization failed when issuing a READ_REV mailbox
command.
DATA: None
ACTION: This error could indicate a hardware or firmware issue. If the issue persists,
report the error to Emulex technical support.
elx_mes0440: Adapter failed to init, READ_REV has missing revision
information
DESCRIPTION: A firmware revision initialization error was detected.
DATA: None
ACTION: This error could indicate a hardware or firmware issue. Update the
firmware. If the issue persists, report the error to Emulex technical support.