Default tcp and mutual chap settings example – Dell Emulex Family of Adapters User Manual
Page 972
Emulex Drivers Version 10.2 for Linux User Manual
P010081-01A Rev. A
Appendix B. Configuring iSCSI Through DHCP
DHCP Option 43 (Vendor-Specific Information)
972
InitiatorName: Not specified. Use the Initiator name already configured. Use
the default name if none was configured.
HeaderDigest: Enabled
DataDigest: Not specified. Assume disabled.
AuthenticationType: One-way CHAP is enabled.
Default TCP and Mutual CHAP Settings Example
The following is an example of default TCP port and mutual CHAP settings.
iscsi:”192.168.0.2”::”000000000000000E”:”iqn.2009-4.com:1234567890”
::”E”:”D”:”M”
In this example, the field values are:
TargetIP: 192.168.0.2
TargetTCPPort: Use default from RFC 3720 (3260).
LUN: 0x0E
TargetName: iqn.2009-04.com:1234567890
InitiatorName: Not specified. Use the Initiator name already configured. Use
the default name if none was configured.
HeaderDigest: Enabled
DataDigest: Disabled
AuthenticationType: Mutual CHAP is enabled.