Dell Emulex Family of Adapters - Manual (Page 710)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
Appendix A. Error and Event Log Information
iSCSI Error and Event Log
710
Figure A-2 iSCSI Error
Because the UCNAs are dual PCI-function adapters, the \Device\RaidPort<n> value
changes depending on the device that observed the error.
iSCSI Error Log on Windows Server 2008
The following is a brief description of the error log codes generated by the iSCSI driver
for Windows Server 2008. It includes the error code, the message displayed, and the
meaning of the message with the recommended resolution.
Table A-14 iSCSI Error Log Entries on Windows Server 2008
Message ID Message Description/Recommended Resolution
0x348d0008 The iSCSI driver failed a WMI IOCTL
request from the port driver because
the request was failed by the ARM
firmware. This error is immediately
followed by another error code entry
indicating the WMI request code in
error. This failure indicates that an operation
attempted from the Microsoft WMI application
resulted in an error. Check the operation being
attempted for user or configuration errors.
0x348d0007 The iSCSI driver failed a WMI IOCTL
request from the port driver. This
error is immediately followed by
another error code entry indicating
the WMI request code in error. This failure indicates that an operation
attempted from the Microsoft WMI application
resulted in an error. Check the operation being
attempted for user or configuration errors.