Dell Emulex Family of Adapters - Manual (Page 1794)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
Appendix H. Configuring PXE Boot for NIC on Dell OCe14000-based Systems
Setting Up a PXE Bootable Network
1794
Select the desired configuration option and press <Enter>.
Figure H-4 Port Menu
Configuring NPar
NPar support provides the ability to configure multiple physical functions or I/O
partitions for each physical adapter port.
Notes:

The settings in this menu can only be configured when the virtualization mode
is set to “NPar”. Otherwise, the settings in this menu are for display purposes
only.

When NPar support is enabled, you must configure the NPar settings
(minimum and maximum bandwidths) for iSCSI and FCoE storage functions in
the NIC BIOS before they can be configured further from their respective
utilities (iSCSI or FCoE BIOS). Otherwise, the Logical Link for that function will
still show as down, and you will not be able to log into targets or find LUNs
behind those targets.
To configure NPar:
1. From Port Menu (Figure H-4), select 1. NPar Configuration and press <Enter>. The
Partition List screen appears.
Figure H-5 Partition(s) List Screen