Figure 11-20 – Dell Emulex Family of Adapters User Manual
Page 1652
Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual
P010097-01B Rev. A
11. Configuring UEFI for Ethernet
Starting the Emulex NIC Configuration Utility
1652
IBM Unified Fabric Protocol Mode Multichannel Configuration
To configure the multichannel configuration when the Multichannel Mode is set to IBM
Unified Fabric Protocol Mode:
1. On the Emulex NIC Selection screen, select Controller Configuration and press
<Enter>. A list of available options is displayed.
Figure 11-20 IBM Unified Fabric Protocol Mode Controller Configuration Screen
2. From the Controller Configuration screen, you can perform the following tasks:
View the current configuration of each function – see “Viewing the
Configuration” on page 1646 for more information.