Showisnsserver, Showroutetable – Dell Emulex Family of Adapters User Manual
Page 390
OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
iSCSI Commands
390
Syntax
ShowARPTable <MAC_Address>
Parameters
ShowiSNSServer
This command shows the currently configured Internet Storage Name Server. It shows
up to four iSNS servers if you are using the OCe14000 family of adapters and includes
IPv6 addresses, as well as, IPv4 addresses. This command also indicates whether or not
iSNS discovery is enabled.
Note: The iSNS server discovery mechanism using DHCP discovers only IPv4
addresses.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
ShowiSNSServer <MAC_Address>
Parameters
ShowRouteTable
This command shows the route table for a specific port.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
ShowRouteTable <MAC_Address>
Parameters
Example
hbacmd h=10.192.203.240 ShowRouteTable 00-00-c9-a0-ce-77
MAC_Address
The MAC address of an iSCSI port.
MAC_Address
The MAC address of an iSCSI port.
MAC_Address
The MAC address of an iSCSI port.