Targetmapping, Vepaenable – Dell Emulex Family of Adapters User Manual
Page 406
OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
Miscellaneous Commands
406
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
SRIOVEnable <MAC> <0|1>
Parameters
Example
The following command enables SR-IOV on NIC physical function with MAC address
00-00-c9-12-34-56:
hbacmd SRIOVEnable 00-00-c9-12-34-56 1
TargetMapping
This command shows a list of mapped targets and the LUNs for the port.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
TargetMapping <WWPN>
Parameters
VEPAEnable
This command enables or disables VEPA Management. VEPA Management is only
supported for OCe1400x NIC ports. For all other board types and port types, this
feature is undefined, and this command returns a “Hardware Does Not Support” error.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
VEPAEnable <MAC> <0|1>
MAC
The MAC address of a NIC port.
0|1
0 = Disables SR-IOV
1 = Enables SR-IOV
WWPN
The WWPN of an FC or FoE adapter.