Dell Emulex Family of Adapters - Manual (Page 1781)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
Appendix F. Dell UEFI
Main Configuration Page
1781
Global Bandwidth Allocation Page
This page allows you to configure the TX bandwidth allocation across enabled
partitions on the port.
Figure F-15 Global Bandwidth Allocation Page
Table F-14 Global Bandwidth Allocation Page Menu Options
Menu Option Description and Available Settings
Partition n Minimum TX
Bandwidth The minimum transmit bandwidth value is the least amount of
bandwidth that the partition can provide. It is represented as a
percentage. There is one listing for each partition with “n”
representing the number of the partition. The valid range is 0-100
percent for each enabled partition.
The minimum transmit bandwidth value must be less than or equal
to the maximum transmit bandwidth value. The total of the
minimum transmit bandwidth values for all enabled functions on
that port must be equal to 100.
Note: A minimum transmit bandwidth value of 0 is a valid value.
When all of the partitions’ minimum transmit bandwidth
values are zero, the bandwidth is distributed equally among
the current active partitions.
Partition n Maximum TX
Bandwidth The maximum transmit bandwidth value is the greatest amount of
bandwidth that the function can provide. It is represented as a
percentage. There is one listing for each partition with “n”
representing the number of the partition.
The valid range is 0-100 percent for each enabled partition.