Fcp traffic history (0700 - 0799) – Dell Emulex Family of Adapters User Manual
Page 1075
Emulex Drivers Version 10.2 for VMware ESXi User Manual
P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1075
elx_mes0602: Failed to allocate CQ_EVENT entry
DESCRIPTION: Failed to allocate a CQ_EVENT entry.
DATA: None
ACTION: None required.
elx_mes0603: Invalid work queue CQE subtype <subtype>
DESCRIPTION: Invalid work queue CQE.
DATA: None
ACTION: None required.
FCP Traffic History (0700 - 0799)
elx_mes0700: Bus Reset on target <i> failed
DESCRIPTION: The bus reset for the specified target failed.
DATA: None
ACTION: None required.
elx_mes0706: IOCB Abort failed - outstanding <value> failed <value>
DESCRIPTION: The driver did not recover all I/O following a reset task management
command.
DATA: (1) outstanding I/O count (2) number of unrecovered I/O
ACTION: Reset call fails to. ESXi tries to recover.
elx_mes0713: SCSI layer issued Device Reset (<value>, <value>) reset
status <value> flush status <value>
DESCRIPTION: A device reset has completed on (tgt, lun). Status values are displayed.
DATA: (1) tgt (2) lun (3) task mgmt status (4) flush status
ACTION: None required.
elx_mes0714: SCSI layer issued bus reset
DESCRIPTION: The SCSI layer is requesting the driver to abort all I/Os to all targets on
this adapter.
DATA: (1) ret
ACTION: Check the state of the targets in question.
elx_mes0717: FCP command <value> residual underrun converted to error
Data: <values>
DESCRIPTION:
DATA: None
ACTION: None required.