Dell Emulex Family of Adapters - Manual (Page 1366)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1366
portattributes
Supported by
Windows
Syntax
elxvcpcmd.exe v=<vcenter server> u=<vc_username> p=<vc_pwd> <h=ESXhostIP>
PortAttributes <WWPN | MAC>
Description
This command shows a list of all port attributes for the port specified on the adapter.
Parameters
posttest
Note: The posttest command does not apply to the LPe16000–series of adapters.
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> posttest <WWPN | MAC>
Description
This command runs the POST on a specified FC port.
Parameters
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC port.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC port. If the port supports VEPA, the
output contains the line “VEPA State: <enabled | disabled>.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.