Dell Emulex Family of Adapters - Manual (Page 1685)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Adding and Configuring Targets
1685
Note: You may need to select ..more to display additional configuration options.
Figure 12-20 Advanced iSCSI Target Information Screen
Logging In or Logging Out of a Target
To log in or out of a target:
1. On the Edit/Ping Target screen (Figure 12-18), select Login or Logout to explicitly
log in or log out of a target, and then press <Enter>.
Note: You may need to select ..more to display additional configuration options.
Deleting a Target
A target can be deleted only if it is not a boot target.
If a target is set as a boot target:
1. On the Edit/Ping Target screen (Figure 12-18), select Boot Target and press
<Enter>.
2. From the pop-up menu, select No and press <Enter>.
3. Select Save/Login and press <Enter>.
To delete the target:
1. On the Edit/Ping Target screen, select ..more to display additional configuration
options.
2. Select Delete Target and press <Enter>.