Dell Emulex Family of Adapters - Manual (Page 1704)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
13. Configuring UEFI for FCoE
Configuring Adapter Parameters
1704
7. Select Commit Changes and press <Enter>. The revised order is saved to the
NVRAM. The Emulex Adapter Configuration Main Menu is displayed.
Figure 13-14 Change Boot Device Order
8. From the Emulex Adapter Configuration Main Menu, select Back to Display
Adapters and RECONNECT DEVICES to complete configuration or select another
configuration option.
Configuring Adapter Parameters
Changing the PLOGI Retry Timer
This option allows you to set the interval for the PLOGI retry timer. This option is
especially useful for Tachyon-based RAID arrays. Under very rare occasions, a
Tachyon-based RAID array resets itself and the port goes offline temporarily in the
loop. When the port comes to life, the PLOGI retry interval scans the loop to discover
this device.
You can choose:

Disable – Default

50 Msec

100 Msec

200 Msec
To change timer values:
1. From the Device Manager screen (Figure 13-2), select the adapter to configure and
press <Enter>.