Removepersistentbinding, Setbindingsupport – Dell Emulex Family of Adapters User Manual
Page 410
OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
Persistent Binding Commands
410
RemovePersistentBinding
This command removes persistent binding between an FC target and a SCSI bus and
target. The binding to be removed can be to a target WWPN, target WWNN, or target
D_ID.
Supported By
Solaris and Windows
Syntax
RemovePersistentBinding <WWPN> <BindType> <ID> <SCSIBus> <SCSITarget>
Parameters
SetBindingSupport
This command enables and sets the binding support(s) for the adapter.
Supported By
Solaris and Windows
Syntax
SetBindingSupport <WWPN> <BindFlag>
Parameters
WWPN
The WWPN of an FC or FCoE port.
BindType
P = Remove binding by WWPN
N = Remove binding by WWNN
D = Remove binding by D_ID
ID
The type of ID based on <BindType>:
Target WWPN if <BindType> = P
Target WWNN if <BindType> = N
Target D_ID if <BindType> = D
SCSIBus
The bus number of the SCSI device.
SCSITarget
The target number of the SCSI device.
WWPN
The WWPN of an FC or FCoE port.