Grass Valley NV9000-SE v.3.0 - Manual (Page 173)

NV9000-SE Utilities • User’s Guide 153
8. Level Sets
Managing Signal Types and Signal Binding
written to the system controller. For instructions, see Implementing Configuration Changes on page
17.
How to Update a Signal Type
1 Launch NV9000-SE. (See Launching and Exiting the Application on page 12.)
2 From the Navigation area, select the ‘Views’ pane and then ‘Signal Types’. The ‘Signal Types’
table appears, as shown in Figure 8-36.
To narrow the list of signals that display, enter the first characters of a signal type in the ‘Name
Filer’ field. The list is automatically reduced to display only signal types matching that charac-
ter string.
Figure 8-36. Signal Types Table
3 To change the signal type name, click on the name being updated in the ‘Name’ column to acti-
vate that cell and enter a new name.
4 To change the signal type description, click on the description being updated in the ‘Descrip-
tion’ column to activate that cell and enter a new description.
5 Click Save .
6 Click X on the window title tab to close the table.
How to Update a Signal Binding
1 Launch NV9000-SE. (See Launching and Exiting the Application on page 12.)
2 From the Navigation area, select the ‘Views’ pane and then ‘Signal Types’. The ‘Signal Types’
table appears, as shown in Figure 8-37.
To narrow the list of virtual levels that display, enter the first characters of a virtual level in the
‘Virtual Level Filter’ field. The list is automatically reduced to display only virtual levels
matching that character string.