Grass Valley NV9000-SE v.3.0 - Manual (Page 414)

394 Rev 3.0 • 25 Mar 10
13. EC9700 and EC9710 Panels
Adding an EC9700/EC9710 Panel
13 Click
Save
to save your changes.
14 Click
X
on the window title tab to close the page.
EC9710 Panel
The ‘EC9710’ page determines how the EC9710 control panel functions and displays. The EC9710
is a “status” GUI only. This software control panel may be installed on as many PCs as desired, but
only two may be active concurrently.
The ‘EC9710’ page is divided into sections:
• GUI Options — Determines which buttons display on the control panel and the default behavior
of each button.
• Lists — Enables you to select from lists of categories, multi-destination devices, salvos and user
buttons, and define each one.
• GUI Layout — Determines the number of rows and/or columns that display on the GUI for
devices, categories, tally connectors, multi-destination devices, and if the display is relative or
absolute.
The control panel, options and layout are configured using the ‘EC9710’ page. When saved, the
configurations are communicated to the computer running the control panel application and appear
to the operator using the control panel.
How to Add an EC9710 Control Panel
Use the ‘Add SW Panel’ wizard or the ‘EC9700/9710’ page.
1 Launch NV9000-SE. (See Launching and Exiting the Application on page 12.)
2 From the Navigation area, select the ‘Tasks’ pane and then ‘Add SW Panel’.
Or
From the Navigation area, select the ‘Configuration’ pane and then ‘SW Panel’. On the ‘SW
Panel’ page, click
Add SW Panel
.
The ‘Add SW Panel’ page appears:
Figure 13-7. Add SW Panel Page