Grass Valley NV9000-SE v.3.0 - Manual (Page 398)

378 Rev 3.0 • 25 Mar 10
12. Master Control
Updating Master Control Details
Updating a Master Control Host
The master control processor’s host can be changed using the ‘Routers’ table accessed through the
‘Views’ pane. You can only select from a list of existing hosts.
How to Update a Router Host
1 Launch NV9000-SE. (See Launching and Exiting the Application on page 12.)
2 From the navigation area, select the ‘Views’ pane and then ‘Routers’. The ‘Routers’ table
appears, as shown in Figure 12-10.
To narrow the list of master control processors that display, enter the first characters of a master
control processor name in the ‘Name Filter’ field. The list is automatically reduced to display
only master control processors matching that character string.
Figure 12-10. Routers Table
3 On the row listing the master control processor being updated, from the drop-down list in the
‘Primary Host’ column, select a new host.
4 Click
Save
.
Or
To revert to the previously saved configuration, click
Revert to Saved
.
5 Click
X
on the window title tab to close the table.
Updating Control Points for Master Control
Control points (also called control ports) are serial or Ethernet ports in the NV9000 server through
which master control processors, routers, panels, and other devices are connected. At any time, the
control point associated with a master control processor can be updated. However, the updated con-