Grass Valley NV9000-SE v.3.0 - Manual (Page 397)

NV9000-SE Utilities • User’s Guide 377
12. Master Control
Updating Master Control Details
If multiple master control processors are selected, each additional master control processor
opens in a separate tabbed window. Click the tab to bring that window forward. If one master
control processor is selected, the details for that master control processor display.
4 Update the ‘Name’ in the field provided.
5 Click
Save .
Or
To revert to the previously saved configuration, click
Revert to Saved
.
6 Click
X
on the window title tab to close the page.
How to Change a Master Control Name Using the ‘Routers’ Table
1 Launch NV9000-SE. (See Launching and Exiting the Application on page 12.)
2 From the navigation area, select the ‘Views’ pane and then ‘Routers’. The ‘Routers’ table
appears, as shown in Figure 12-9.
To narrow the list of master control processors that display, enter the first characters of a master
control processor name in the ‘Name Filter’ field. The list is automatically reduced to display
only master control processor matching that character string.
Figure 12-9. Routers Table
3 Locate the row listing the master control processor being updated.
4 Click on the ‘Name’ field to activate it and enter a new name.
5 Click
Save
.
Or
To revert to the previously saved configuration, click
Revert to Saved
.
6 Click
X
on the window title tab to close the table.