Grass Valley NV9000-SE v.3.0 - Manual (Page 415)

NV9000-SE Utilities • User’s Guide 395
13. EC9700 and EC9710 Panels
Adding an EC9700/EC9710 Panel
3 Enter information in the fields provided. Entries must be entered in all active fields:
4 Click
Add
. The ‘SW Panel Details’ page appears, as shown in Figure 13-8.
Or
Click
Finish . This adds the EC9710 control panel to the NV9000-SE system and clears all fields
so that another control panel can be added immediately. However, no button definitions are
added. To add details to the control panel, locate the control panel and perform steps 5 through
14 as described in this procedure. (See
How to Locate and View Existing EC9700/EC9710 Pan-
els on page 399 . )
Or
Field Description
Type From the drop-down list, select ‘EC9710’.
Computer (or Windows
User) Name where
control panel will be
located
Enter the name of the computer or user name on a network where the control
panel will be installed.
User From the drop-down list, select a user type. By default, only the user type
‘EnvyUser’ is supported at this time.
Configuration Options Click the radio button matching the option you want. If no other control panel
configuration currently exists in the NV9000-SE system, all radio buttons are
deactivated except for ‘New’.
If copying a control panel configuration, enter a ‘New Name’ in the field
provided and select where ‘copied from’ from the drop-down list.
If copying an ‘Existing’ control panel configuration, select the configuration
from the drop-down list.