Grass Valley NV9000-SE v.3.0 - Manual (Page 205)

NV9000-SE Utilities • User’s Guide 185
9. Devices
Device Connections Queries
How to Add a Device Using the ‘Query Phys Conns’ Table
1 Launch NV9000-SE. (See Launching and Exiting the Application on page 12.)
2 From the Navigation area, select the ‘Views’ pane, then ‘Queries & Advanced Operations’ and
then ‘Device Physical Connections’. The ‘Device Physical Connections’ table displays, as
shown in
Device Phys Conns Table with Results on page 185.
3 Select a level set from the ‘Select Level Set for Query’ drop-down list. All devices within that
level set display, as shown in Figure 9-22. For more information on virtual levels, see About
Levels and Level Sets on page 112.
Figure 9-22. Device Phys Conns Table with Results
4 In the blank row, in the ‘Device’ column enter the name of the device.
5 In the same row, enter the device’s input or output number associated with a virtual level. Each
virtual level displays as a single column in the table, divided into ‘Inputs’ and ‘Outputs’. The
number is the number of the physical port where the cable connects from the device to the
router. For more information on virtual levels, see
Physical Levels vs. Virtual Levels on page 112.
6 Click
Save
.
Or
To revert to previously saved configuration, click
Revert to Saved .
7 Click
X
on the window title tab to close the table.