Grass Valley NV9000-SE v.3.0 - Manual (Page 496)

476 Rev 3.0 • 25 Mar 10
16. Tielines
Updating a Tieline
5 Click
Save
.
Or
To revert to previously saved configuration, click
Revert to Saved .
6 Click X on the window title tab to close the table.
Changing Tieline Cost
The cost associated with a tieline represents the financial expenditure required to route using that
tieline. The cost numbers are representative and not actual dollars. The lower the number, the
cheaper the tieline. For example, a cost of “1” means that the tieline is cheaper to use for switching
than a tieline with a cost of “3”. For more information, see
Costs on page 457.
Tieline costs can be changed using the ‘Tielines’ table, accessed through the ‘Views’ pane.
How to Change a Tieline Cost
1 Launch NV9000-SE. (See Launching and Exiting the Application on page 12.)
2 From the Navigation area, select the ‘Views’ pane and then ‘Tieline’. The ‘Tieline’ table
appears, as shown in Figure 16-14.
To narrow the list of tielines that display, enter the first characters of a tieline name in the
‘Name Filter’ field. The list is automatically reduced to display only tielines matching that
character string.
Figure 16-14. Tieline Table
3 Click on the ‘Cost’ field to activate it and enter a new cost number. Do not use decimal points,
commas or punctuations, however negative number (i.e., –2, –3) are allowed.