Grass Valley NV9000-SE v.3.0 - Manual (Page 187)

NV9000-SE Utilities • User’s Guide 167
9. Devices
Locating and Viewing Device Details
How to Add a Single Device Using the ‘Devices’ Table
1 Launch NV9000-SE. (See Launching and Exiting the Application on page 12.)
2 From the Navigation area, select the ‘Views’ pane and then ‘Devices’. The ‘Devices’ table
appears:
Figure 9-6. Devices Table
3 Click Add Device . A blank row appears.
4 In the blank row, click on the row in the ‘Mnemonic’ column to activate it and enter a name for
the new device.
5 In the same row, click on the row in the ‘Level Set’ column and select a system controller from
the drop-down list.
6 Click
Save
. The device name is saved and the next sequential identification number assigned,
but categories and other details are not defined. To add details, locate the device and perform
steps 5 through 7 as described in
How to Add a Single Device on page 160. (See How to Locate
and View Devices Using the ‘Devices’ Page on page 168.)
7 Click X on the window title tab to close the table.
Locating and Viewing Device Details
Depending on the information you want to view, different pages or tables present different device
information:
• ‘Devices’ page (accessed through the ‘Configuration’ pane) — A list of existing devices, one
device per row, and associated level sets and categories. Locate devices by name or level set.
• ‘Devices’ table (accessed through the ‘Views’ pane) — A list of level sets and associated
devices, one level set per row, with name, description and filepath. Locate devices by mne-
monic or level set.