Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 133)

Zone/Overtravel Parameters
Chapter 6
6-7
Group 3 -- If this is selected for an axis, it indicates that its values for
programmable zones 2 and 3 are checked simultaneously with any other
axis in group 3.
Axis Parameter
Number
Axis Parameter
Number
(1) [1009] (7) [7009]
(2) [2009] (8) [8009]
(3) [3009] (9) [9009]
(4) [4009] (10) [10009]
(5) [5009] (11) [11009]
(6) [6009] (12) [12009]
Range
Selection Result
(a) Belongs to no groups
(b) Group 1
(c) Group 2
(d) Group 3
Notes
This parameter must be set independently for each axis.