Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 552)

Setting In-process Dresser Parameters
Chapter 27
27-2
Function
This parameter defines to the CNC the minimum value to which the IPD
software can move the in-process roll surface (not axis position).
In-process dresser motion is suspended when this size is reached.
Axis Number
All [1]
Range
0.000000 to 100.000000 in.
0.000000 to 2540.000000 mm
Notes
This is a global parameter; the value set here applies to all axes.
Function
Use this parameter to define the axis that controls the in-process dresser.
This axis must be one of the configured axes in the system, but not the
primary, horizontal, or vertical axis.
Axis Number
All [133]
27.2
Wheel Flange Protect
Radius
27.3
In-process Dresser
Axis Name