Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 467)

Paramacro Parameters
Chapter 21
21-13
Function
Use these parameters to define the program number called by the Type II
paramacro call. The program name entered here must be stored in
memory at the time the G-code macro call is executed.
The program you call with a G-code macro must have a 5-digit numeric
program name preceded by the letter O. When defining a program name
using this parameter, the O is not specified.
Parameter Parameter Number
PROGRAM NUMBER FOR MACRO CALL 1 [702]
PROGRAM NUMBER FOR MACRO CALL 2 [705]
PROGRAM NUMBER FOR MACRO CALL 3 [708]
PROGRAM NUMBER FOR MACRO CALL 4 [711]
PROGRAM NUMBER FOR MACRO CALL 5 [714]
PROGRAM NUMBER FOR MACRO CALL 6 [717]
PROGRAM NUMBER FOR MACRO CALL 7 [720]
PROGRAM NUMBER FOR MACRO CALL 8 [723]
PROGRAM NUMBER FOR MACRO CALL 9 [726]
PROGRAM NUMBER FOR MACRO CALL 10 [729]
PROGRAM NUMBER FOR MACRO CALL 11 [732]
PROGRAM NUMBER FOR MACRO CALL 12 [735]
PROGRAM NUMBER FOR MACRO CALL 13 [738]
PROGRAM NUMBER FOR MACRO CALL 14 [741]
PROGRAM NUMBER FOR MACRO CALL 15 [744]
Range
1 to 8999
Notes
This is a global parameter; the value set here applies to all axes.
21.3.6
Program Numbers for Macro
Call 1 to 15