Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 38)

Using AMP Applications and ODS Utilities
Chapter 2
2-12
The software refers to each AMP parameter by an identification number.
All AMP parameters have an identification number that allows for
Quick Editing.
To edit a parameter, follow these steps:
1. Press
[F4]
to pull down the Quick Edit menu.
The following screen appears:
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Lathe AXIS: X <P1> - linear File : TEST
- Axis Parameters -
P1:
Axis One’s Name : X
Axis Two’s Name : Y
Axis Three’s Name : Z
Axis Four’s Name : U
Axis Five’s Name : V
Axis Six’s Name : W
Axis Seven’s Name : C
Axis Eight’s Name : A
Axis Nine’s Name : B
Axis Ten’s Name : $X
Axis Eleven’s Name : $Y
Axis Twelve’s Name : $Z
Axis Thirteen’s Name : $B
Page 1 of 4
QUICK EDIT
Parameter Number : [ ]
2. Type in the number of the parameter to be edited; then press
[ENTER]
.
The workstation displays the parameter name and number, and waits
for a new value to be entered.
3. Select the new value.
The workstation stores the new value and returns to the current AMP
editor menu.
4. To halt the Quick Edit process, press
[ESC]
.
2.8
Quick Edit