Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 551)

Chapter
27
27-1
Setting In-process Dresser Parameters
Configure these parameters so that the control automatically generates axes
motion, perpendicular to the direction of the motion between the grinding
wheel and the part, to keep the wheel in contact with the part.
Important: The parameters in this chapter are grinder-specific and cannot
be used for a mill or lathe.
The workstation displays this screen when you select the “In-process
Dresser” group from the main AMP menu:
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit!
Control Type: Cylindrical Axis : X - linear File : TEST
- In-Process Dresser -
Wheel Flange Protect Radius : 0.000000 in
In-Process dresser axis name : None
Horizontal compensation Axis : X
Vertical compensation Axis : Y
Shrinkage Direction : minus
This chapter describes the 5 in-process dresser (IPD) parameters:
Parameter: Page:
wheel flange protect radius 27-2
in-process dresser axis name 27-2
horizontal compensation axis 27-4
vertical compensation axis 27-4
shrinkage direction 27-5
27.0
Chapter Overview
27.1
In-process Dresser
Parameters