Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set User Manual
Page 48
Advertising
Using AMP Applications and ODS Utilities
Chapter 2
2-22
At the control:
1.
Press the {SYSTEM SUPPORT} softkey.
2.
Press the {AMP} softkey.
3.
Press the {UPLD/DWNLD} softkey.
The operator panel CRT displays this screen:
Figure 2.2
Upload/Download Parameter Screen
TO
PORT A
FROM
PORT A
TO
PORT B
FROM
PORT B
UPLD / DWNLD
AMP
PAL AND I/O
SELECT OPTION USING THE UP/DOWN ARROW
4.
Use the up or down arrow keys to select the AMP option.
5.
Depending on which port the storage device is connected to, press the
{FROM PORT A} or {FROM PORT B} softkey.
Important: The 9/230 has only one serial port. It is labeled and configured
as Port B.
Advertising