Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 587)

Chapter
32
32-1
Adaptive Feed & Depth Parameters
When you select the “Adaptive Feed & Depth” group the workstation
displays this screen:
Proj: TranLine Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration
- Adaptive Feed & Depth Parameters -
Page 1 of 1
Feed Integral Torque Gain (1) : 0.5
Feed Proportional Torque Gain (1) : 0.1
Feedrate Acc/Dec Enable (1) : Disabled
Controlling Axis for Probe <P1> : Y
Controlling Axis Trigger Dir <P1> : Plus
Trigger Tolerance for Probe <P1> : 2.540mm
Travel limit for Probe <P1> : 254.0mm
Adaptive Depth Feedback Source <P1> : From Probe
F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Mill AXIS: X <P1> - linear P1 File : TEST
The Adaptive Feed & Depth parameter group is only available for mill
control types. These parameters are described on these pages:
Parameter: Page:
Feedrate Acc/Dec Enable 32-4
Feed Proportional Torque Gain 32-3
Feed Integral Torque Gain 32-2
Controlling Axis for Probe 32-9
Controlling Axis Trigger Dir 32-10
Trigger Tolerance for Probe 32-11
Travel Limit for Probe 32-12
Adaptive depth feedback source 32-13
32.0
Chapter Overview