Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 446)

Power-up G-code Parameters
Chapter 19
19-14
Function
Use this parameter to select the default G-code for modal group 13. You
can use this parameter for lathe/mill applications.
The selected G-code specifies under which mode the control operates at
power-up or reset:
·
G61 Exact Stop
·
G63 Tapping
·
G62 Auto Corner Override
·
G64 Cutting
Lathe
A
Lathe
B
Lathe
C
Mill
Control
Active Mode
G61 G61 G61 G61 Exact Stop Mode
G62 G62 G62 G62 Auto Corner Override Mode
G63 G63 G63 G63 Tapping Mode
G64 G64 G64 G64 Cutting Mode
Axis Parameter Number
Single Process Process 1 Process 2
All [533] [20533] [21533]
Range
Selection Result
(a) G61 (Exact Stop Mode)
(b) G62 (Auto Corner Override Mode)
(c) G63 (Tapping Mode)
(d) G64 (Cutting Mode)
Notes
This is a global parameter; the value set here applies to all axes.
For dual--processing controls, this is a per process parameter. The value set
in the parameter applies to all of the axes assigned to that process.
19.13
PTO G-code for
Modal Group 13