Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 400)

Letter Format Parameters
Chapter 17
17-2
When you select the “Letter Format” group and the control type “Lathe,”
the workstation displays these screens:
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Lathe AXIS: X <P1> - linear P1: File : TEST
- Letter Format -
Page 2 of 2
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration
- Letter Format -
Page 1 of 2
S: Orient Angle Word Format : 3.0 degrees
S: Spindle RPM Word Format : 4.0 rpm
T: Tool Number Integer Format : 4.0
,C/,R Word Format : 4.4 inch and 5.3 metric
D: Integer Format : 4.0
D: Word Format : 4.4 ipm 5.3 mmpm
E: # THRDS/INCH Word Format : 3.4 threads per inch
F: IPM/MMPM Word Format : 4.4 ipm 5.3 mmpm
F: IPR/MMPR Word Format : 2.5 ipr 3.4 mmpr
Lead: Word Format : 2.5 ipr 3.4 mmpr
P dwell type : integer/decimal : Decimal format
P: Integer Format : 4.0
Q: Integer Format : 5.0
Q: Word Format : 4.4 inch and 5.3 metric
Q: Thread Marker Angle Shift : 3.0 degrees
R: Word Format : 4.4 inch and 5.3 metric
S: CSS Word Format : 3.2 ft/min 2.3 meters/min
F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Lathe AXIS: X <P1> - linear P1: File : TEST
These parameters are described on these pages:
Parameter: Page:
D Integer and Word Formats 17-3
E Word Format 17-5
F Word Formats 17-6
H Integer and Word Formats 17-9
Lead Word Format 17-11
P Word Format 17-12
Q Integer and Word Formats 17-14
R Word Formats 17-17
S Word Formats 17-19
T Word Format 17-22
Chamfering/Corner-R Word Letter Formats 17-23