Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set User Manual
Page 706
Patch AMP
Chapter 41
41-4
The control displays a message on its operator panel indicating AMP HAS
BEEN MODIFIED BY PATCH AMP. This message will appear at every
power up. Clear the message using the [CAN] key on the operator panel.
After you have completed all of your AMP changes and your machine is
running properly we recommend you back AMP up to ODS. Once you
have backed AMP up to ODS re-download that AMP file to permanently
remove the AMP HAS BEEN MODIFIED BY PATCH AMP message.
Refer to your 9/Series AMP reference manual for details on backing up
AMP to ODS.
Patch AMP Values
AMP values are configured using their QuickEdit numbers in patch AMP.
The patch AMP values are always numeric values.
Important: All patch AMP values are in millimeters. Units of time can be
milliseconds, seconds, or minutes (as shown in the following table).
Use the Patch AMP Value in the table below to make the correlation
between the numeric value and the AMP description. Shaded parameters
are used for most applications. An L next to the parameter number
indicates lathe only.
Four--digit AMP parameter numbers are per axis. The first digit being the
axis number.
Parameter
Parameter Name
Default Value
Patch AMP Value
11
Standard Motor Table Values
yes
0 -- No
1 -- Yes
21
L
Roughing cycles retract amount
0.00000 mm
0.00000 to 9999.90000 mm
22
L
Percent of cutting depth
100%
0 to 255%
23
L
Perform a rough--finishing cut
False
0 -- False
1 -- True
32
PORT # FOR PARAMACRO
EXTERNALS
PORT B
0 -- PORT B
1 -- PORT A
66
Rapid Override in Dry Run
True
0 -- False
1 -- True
69
PAL background interval
30 msec
30 to 10,000 msec
70
Dev. Detection Filter Time,
spindle 1
20 msec
20 to 400 msec
71
Retract amount -- peck drilling
25.40000 mm
0.00000 to 99999.00000 mm
73
Pullout angle, chamfered thrd
5.0 degrees
0.0 to 89.0 degrees
74
Pullout dist, chamfered thrd
5.080 thread leads
0.000 to 50.000 thread leads
76
Cycle clearance amount
0.25400 mm
0.00000 to 99999.00000 mm