Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set User Manual
Page 86
Advertising
![background image](/manuals/580257/86/background.png)
Chapter 4
Axis Parameters
4-2
This table shows you where each of the axis parameters is found:
Axis Parameter:
Page:
Axis Name
4-5
Axis Process
4-6
Process Spindles
4-7
Integrand Name
4-8
Incremental Name
4-10
Diameter Axis Name
4-11
Rollover value
4-13
Axis Sharable
4-14
All axes of the control must be assigned an axis name. The various axes of
a lathe, mill and dual-process lathe are shown in Figure 4.1.
Examples of a surface grinder and cylindrical grinder are shown in
Figure 4.2.
Advertising