Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 31)

Using AMP Applications and ODS Utilities
Chapter 2
2-5
The workstation displays a screen showing that it is loading the
selected utility, then displays this AMP editor menu screen:
Proj: TEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : AXIS :
The F5-Process option
appears only on a Dual
Process project
Your screens may differ slightly, depending on the application you use.
The F1-File option is the only option that is enabled.
Before specifying any parameter values, you must use one of these options
to select the desired AMP file:
Creating a New AMP File
Opening an Existing AMP File
Copying an AMP File from the Current Project
Copying an AMP File from Another Project
Use this procedure to create a new AMP file:
1. Press
[F1]
to pull down the File menu.
2.3
Selecting AMP Files
2.3.1
Creating a New AMP File