Tuning amp at the machine, 0 chapter overview – Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set User Manual
Page 679
Chapter
40
40-1
Tuning AMP at the Machine
This chapter covers the Adjustable Machine Parameters (AMP) that can be
tuned at the machine. These parameters are tuned using the softkeys on the
control’s operator panel. Use this procedure to access the online AMP
parameter softkeys:
1.
Press the
{SYSTEM SUPORT}
softkey.
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
2.
Press the
{AMP}
softkey.
(softkey level 2)
PRGRAM
MANAGE
AMP
DEVICE
SETUP
MONI-
TOR
TIME
PARTS
The control display the following softkeys:
(softkey level 3)
AXIS
PARAM
PATCH
AMP
UPDATE
BACKUP
UPLD/
DWNLD
BACKUP
AMP
The functions of these softkeys are covered on these pages:
Softkey:
Page:
{AXIS PARAM}
40-2
{STORE BACKUP}
40-16
{UPLD/DWNLD}
40-17
{BACKUP AMP}
40-21
Important: Refer to chapter 37 for information on the functions of the
{PATCH AMP}
softkey.
40.0
Chapter Overview