Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set User Manual
Page 55
Using AMP Applications and ODS Utilities
Chapter 2
2-29
When you upload an AMP file from a storage device, the workstation must
be connected to the storage device. In this procedure the specific storage
device is an Allen-Bradley 1770-SB cassette recorder.
To upload a file from the control to a 1770-SB cassette recorder, use this
procedure:
At the cassette recorder:
1.
Connect the cassette recorder to the control. Refer to your integration
and maintenance manual for more information.
2.
Turn “ON” the cassette recorder.
3.
Load an AMP data cassette into the cassette recorder.
4.
Set the baud rate switch to ‘‘1200.”
5.
Set the track select switch to “Continuous.”
At the control:
1.
Press the {SYSTEM SUPPORT} softkey.
2.
Press the {AMP} softkey.
3.
Press the {UPLD/DWNLD} softkey.
2.13.2
Uploading an AMP File from
a Control to a Storage
Device, and then to a
Workstation