Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 56)

Using AMP Applications and ODS Utilities
Chapter 2
2-30
The operator panel CRT displays this screen:
Figure 2.4
Upload/Download Parameter Screen
TO
PORT A
FROM
PORT A
TO
PORT B
FROM
PORT B
UPLD / DWNLD
AMP
PAL AND I/O
SELECT OPTION USING THE UP/DOWN ARROW
4. Use the up or down arrow keys to select the AMP option.
5. Depending on which port the storage device is connected to, press the
{TO PORT A} or {TO PORT B} softkey.