Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 473)

Chapter
22
22-1
Tool Offset Parameters
Modern machining processes usually require a machine that is capable of
selecting different tools. Typically tools are mounted in a turret or chuck
and assigned tool numbers. These sections describe the parameters that are
used to set up tool offsets. Tool offsets let the programmer basically
ignore tool mounting in the part program. Tool offset parameters are
broken into these sections:
Parameter: Page:
Basic Tool Offset Setup Parameters 22-3
G37 Tool gauging Cycle Parameters 22-10
Tool Magazine/Turret Parameters 22-14
Tool Life Monitor Parameters 22-17
22.0
Chapter Overview